blog veritas enlightenment edje code articles audio
« Jonathan gives us an …
  » Splunk 2.0.12 Release…

OpenSolaris BFU: All the current goodies without the hassle

14 Jul '06 - 20:07 by benr

Have you downloaded and installed Solaris Express: Community Release? Have you considered downloading, compiling and installing the latest code? Have you run into problems or just been to lazy to do it? Does it just seem too complicated? Wanna run the latest code without having to build it yourself? If so, then BFU is for you.

Here's the 30 second BFU Primer: When you compile OpenSolaris the result will be a series of CPIO archives. These archives are then installed on top of your current installation using the BFU utility. BFU origonally stood for "Bonwick/Faulkner Upgrade" but has since become more widely known as "Blindingly Fast Upgrade".

When you go to the OpenSolaris Download Page you have 2 options. You can download the code, the ON build tools (which includes BFU and friends), the Studio compilers, and the closed binaries and build OpenSolaris yourself... or, for the lazy or impatient you can simply download the BFU Archives and ON build tools. By downloading the BFU Archives your really just grabbing a pre-compiled Solaris build and saving yourself the time and effort.

So how do you BFU? If you have a fairly recent installation of Solaris Express Community Release (if your further back than like build 32 I'd recommmend upgrading first, it might work, but I won't guarrentee it) download the Archives and the build tools for your platform. Here's a step by step run through of the general procedure:

  1. Download the "ON Specific Build Tools" (SUNWonbld...tar.bz2) and "ON BFU Archives" (on-bfu-...tar.bz2).
  2. Unpack both.
  3. In the onbld/ directory, install the SUNWonbld package. If you have a prior installation of it remove it first (pkgrm SUNWonbld). 
    root@mycluster1 b44$ cd onbld/
root@mycluster1 onbld$ pkgadd -d .

The following packages are available:
  1  SUNWonbld     OS-Net Build Tools
                   (i386) 11.11,REV=2006.07.11.04.27

Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
....
Installation of  was successful.
root@mycluster1 onbld$
  4. Setup the following enviromental variables (bash syntax shown): 
    export FASTFS=/opt/onbld/bin/i386/fastfs
export BFULD=/opt/onbld/bin/i386/bfuld
export GZIPBIN=/usr/bin/gzip
export PATH=/opt/onbld/bin:/opt/onbld/bin/i386:$PATH
  5. BFU your system using the archives you unpacked. You must use a fully qualified path: 
    root@mycluster1 b44$ bfu /export/b44/archives-20060710/i386/
Copying /opt/onbld/bin/bfu to /tmp/bfu.3211
Executing /tmp/bfu.3211 /export/b44/archives-20060710/i386/
Loading /export/b44/archives-20060710/i386/ on /
Creating bfu execution environment ...

Give it a couple minutes to extract everything...

MAKE SURE YOU RESOLVE ALL CONFLICTS BEFORE REBOOTING.

To install resolved changes required for reboot in the boot
archive, invoke 'bootadm update-archive'

/tmp/bfu.3211[2008]: test: argument expected
Removing obsolete smf services ...
Disabling unneeded inetd.conf entries ...
Connecting platform and name service profiles ...
Marking converted services as enabled ...
cp: cannot access /net/greenline.eng/meta0/smf/post-5090532/sysidtool.xml
bfu: could not copy /net/greenline.eng/meta0/smf/post-5090532/sysidtool.xml
cp: cannot access /net/greenline.eng/meta0/smf/post-5090532/kdmconfig.xml
bfu: could not copy /net/greenline.eng/meta0/smf/post-5090532/kdmconfig.xml
Upgrade of mycluster1 took 1:26.
Turning off delayed i/o and syncing filesystems ...
Filesystem           Mode
/                    safe
/usr                 safe

Entering post-bfu protected environment (shell: ksh).
Edit configuration files as necessary, then reboot.

bfu#
  6. Run the ACR (Automatic Conflict Resolution) utility from the BFU KSH shell: 
    bfu# /opt/onbld/bin/acr
Getting conflict resolution information from /export/b44/archives-20060710/i386//conflict_resolution.gz: 610 blocks
Building command list for the class action scripts:
Begin processing files
PROCESSING etc/crypto/kcf.conf
PROCESSING etc/driver_classes
PROCESSING etc/path_to_inst
PROCESSING etc/shadow
PROCESSING etc/vold.conf
PROCESSING etc/rmmount.conf
PROCESSING etc/inet/hosts
PROCESSING etc/inet/ipnodes
PROCESSING etc/default/init
PROCESSING etc/remote
PROCESSING etc/nsswitch.conf
PROCESSING etc/inet/services
PROCESSING etc/security/auth_attr
PROCESSING etc/security/exec_attr
PROCESSING etc/security/prof_attr
PROCESSING etc/user_attr
PROCESSING etc/vfstab
PROCESSING etc/auto_master
PROCESSING boot/grub/menu.lst
PROCESSING etc/openwin/server/etc/OWconfig
PROCESSING etc/power.conf
See /tmp/acr.ggayJl/allresults for more information.
  7. Almost everything should be done for you, ACR didn't report any errors so things are probly done. Look at the files in /bfu.conflicts to decide whether you should use the file you have or the new one found there.
  8. When your confident you've resolve the conflicts as best you can, restart your system. 
    root@mycluster1 b44$ sync;sync;sync;shutdown -y -g0 -i6
Shutdown started.    Fri Jul 14 16:43:09 PDT 2006
Changing to init state 6 - please wait
....

If all goes well, your system will boot up and be running the new code. If you want GRUB to list the real version your running you'll want to update /boot/grub/menu.lst, but this is only cosmetic.

Please be aware that BFU'ing your system is a potentially dangerous thing. You should backup or use LiveUpgrade prior to BFU'ing your system if your paranoid but in most cases BFU's suceed with little to no problem at all. Backing up your user data is, of course, always a good idea.

If your wondering "Whats the downside?" Really just the obvious, you can't customize your build. The only somewhat common change made by some of us when doing our own builds is to modify the build flags to create a non-debug kernel. The default is to build a "debug" kernel and thus the downloadable archives include that kernel.

As an aside. If your a long time Linux user who builds their own kernel, you might be wondering how you can revert to your old build or install multiple kernels. You can't... not easily anyway. OpenSolaris, unlike Linux, is the entire core of the OS, not just the kernel itself. When you BFU your installing not only the kernel and modules but utilities and libraries. Because of this scope you can't just create an alternate GRUB bootline for a diffrent kernel. Technically if you did just build the kernel and nothing else, you could do this, but because Solaris doesn't allow you to build everything into the kernel in the way that Linux does, you'll never see it done unless your hacking on the kernel itself of course. The closest equivilent would be to use LiveUpgrade to duplicate your installation to another disk or partition and then BFU onto the alternate installation and create GRUB boot options for both, so that you can alternate between them.

When your reboot completes, log into your system and your login (set by /etc/motd) should look something like this: 

benr@monolyth ~$ ssh 10.10.0.171
Password:
Last login: Fri Jul 14 15:43:51 2006 from 10.10.1.110
Sun Microsystems Inc.   SunOS 5.11      opensol-20060710        Jul. 11, 2006
SunOS Internal Development:  stevel 2006-07-11 [tonic.20060710]
bfu'ed from /export/b44/archives-20060710/i386/ on 2006-07-14
Sun Microsystems Inc.   SunOS 5.11      snv_42  October 2007

Presto Chango! Enjoy.

Side Note: Recent code drops from Build 44 report as snv_42, as you can see above. Ignore it and judge based on the drop date and the build schedule. In my examples above, the code drop date (nightly) date is 7/10/06, and a quick look at the schedule shows that 7/10 is the day on which the Build 44 gate closes.


- - C O M M E N T S - -

In engineering, we use a script known as Install (cap-eye install over the phone) to install just the kernel binaries. Its risky since you need to be sure that your kernel and userspace will match, but it allows you to install a new kernel without touching the original installed kernel.

Of course, if youre wanting to upgrade to a new build, its generally not very useful. But if you have a kernel tweak and you know your userspace is compatible, its an invaluable timesaver

John Levon (URL) - 14 July '06 - 20:56

Ben, I recommend that you not use `sync; sync; sync` because that still doesn’t guarantee that the FS buffer will be definitely flushed to the disk (new I/O will cause the buffer to be used again).

Instead, you might want to use `lockfs -faw; reboot`:

-f flushes the FS buffer
-a does the aforementioned flush for all UFS FileSystems
-w does a write lock, so that no I/O (with the exception of tools that operate directly on /devrdsk/..) can write to the FileSystem.

For more information, please refer to lockfs(1M).

ux-admin (Email) - 15 July '06 - 05:06

If you are doing work that requires multiple kernels, see “cap-I install”:

man -M /opt/onbld/man Install

This command will bundle up the various kernel and driver binaries in such
a way that you can boot a self-consistent group. Not useful if your changes
span kernel and userland, of course.
– Stephen

Stephen (Email) (URL) - 16 July '06 - 14:43

I tried a BFU upgrade from snv_46 to snv_51 and I get a message saying BIND 8 has been removed from ON; BIND 9 is available from SFW.Run /ws/onnv-gate/public/bin/migrate_bind9 to migrate to BIND 9 and BFU is aborted. I searched for this script everywhere that i could possibly think of. I am a linux user trying to learn solaris. Can you help.

Bhavin (Email) - 19 October '06 - 00:39

I would like to request your input on a subject: “inetd.conf converted to smf” in solaris 10

I have a product runs off the inetd.conf file.

If listened to your audio section many times and thought maybe i would send this your way..

> #### Product Name Goes Here ####
> # Lines added by “Product Name” installation script on Sat Sep 2 09:29:32 2006
> netbios-ssn stream tcp nowait NOLUID /usr/product_name/sys/pro_nbsd prod_nbsd
> vtpd stream tcp nowait NOLUID /usr/product/sys/pro_vtpd pro_vtpd
> #### Product Name ####

Is there a way to convert or export these entries back into inetd.conf from the new solaris 10 smf file, or turn smf completely off

Edward T. (Email) - 14 December '06 - 17:53

0a6f1836 c91c70b0 ff1 ancor1|ancor2|ancor3|ancor4|ancor5 [URL= [[http://google4.com.com]] ]ancor1ancor2ancor3ancor4ancor5[/URL] is abolished by the Libyan Revolution.
It seems to me he made the cave larger in the ancor1ancor2ancor3ancor4ancor5 .
She would dance and I would [[http://google4.com.org]] online ancor1ancor2ancor3ancor4ancor5 , for our food.

Hi, all. Nice site…I really like your site ! Good job man.

Omar (Email) (URL) - 13 May '08 - 06:44

0a6f1836 c91c70b0 ff1 ancor1|ancor2|ancor3|ancor4|ancor5 He tried to reach [URL= [[http://google5.com.com]] ]cheap ancor1ancor2ancor3ancor4ancor5[/URL] , but landed on Venus.
These kennel in turn contract with the fresh ancor1ancor2ancor3ancor4ancor5 .
If you were to ask [[http://google5.com.org]] ancor1ancor2ancor3ancor4ancor5 : what are you doing out here?

I have your site for its useful and funny content and simple design.

Hanna (Email) (URL) - 14 May '08 - 14:01

shop zithromax welcome

zithromax (Email) (URL) - 15 May '08 - 10:58

teeny

teeny (Email) (URL) - 16 May '08 - 04:30

The more things a man is ashamed of, the more respectable he is.
[[http://allmednews.org/med/pills/paxil/]] – paxil

Nadin - 18 May '08 - 06:01

xanax

xanax (Email) (URL) - 21 May '08 - 08:36

kubis

kubis (Email) (URL) - 23 May '08 - 13:49

blodulv

blodulv (Email) (URL) - 24 May '08 - 05:05

stromkern

stromkern (Email) (URL) - 25 May '08 - 23:42

please dont delete this
[url=[[http://www.bebo.com/DiscountV]Discount]] Viagra[/url]
[url=[[http://www.bebo.com/OrderV]Order]] viagra[/url]

Priokunurry (Email) (URL) - 31 May '08 - 19:17

What is Vardenafil? article > # 4Y726 [url=[[http://www.youtube.com/user/EdTada]lev..]]]] 8Ik50
^M